Aztec Refresher Propane-Powered Restoration System - 30"

Aztec Refresher Propane-Powered Restoration System - 30"

Item # AZT-042-1

  • A propane-powered, planetary driven, complete system for stripping, honing, polishing and burnishing polished concrete and terrazzo floors.
  • Engine: Kawasaki 603 cc; Centrifugal clutch: Standard
  • Head pressure: 330 lbs.; Head size: 10"
  • No. of heads: 3; Head speed: 1295 RPM (Counter clockwise)
30", ea
Manufacturer Item #042-1

The Refresher is heavy and rugged enough to handle the aggressive demands of honing and polishing concrete, yet light enough to be highly maneuverable and smooth running for hours of continuous use. Synchronous drive speed of 250 RPM (clockwise).


  • Gimbled head follows floor resulting in consistent gloss.
  • Rugged powder-coated US steel frame and body.
  • Self-leveling, mechanically sealed drive unit.
  • Synchronous positive drive belt with metal synchronous drive pulleys.
  • Solid-lube multi-directional bearings with Nylos seals.
  • Premium German precision centrifugal clutch.
  • Custom catalytic muffler.
  • 8 gallon water tank for wet operations.
  • 2" vacuum port for dry operations.
  • 11-gauge tube extra-heavy transport wheel.
  • Tool-free steel lug locking quick change heads.
  • Compatible w/3" puck-style and 10" pad diamonds.
  • Green LEED and GS-42 compliant dry with vacuum.

Refresher Multifunction 4-Step Process

  • Step 1: Stripping/Deep Scrubbing. Strip or deep scrub the floor to remove VCT floor finish, sealer or deeply ground-in soils. Many polished concrete, terrazzo and marble floors have been coated with VCT floor finish or sealer, reducing their luster and
  • Step 2: Honing. Hone the floor to remove scratches or sealers using the quick-change Velcro[R] driver with hybrid diamonds. These diamonds will cut more deeply than resins, but not as deeply as metal diamonds, allowing the scratches or sealers to be re
  • Step 3: Polishing. Polish the floor using the Velcro[R] drivers with resin puck diamonds or the Mighty-Lok[R] drive with diamond pads.
  • Step 4: Burnishing. Apply guard and burnish the floor using the Mighty-Lok[R] head to accept burnishing pads or diamond impregnated pads. Burnish until the floor heats to 90° F.
/ 5