NSS® Charger 2022ABLT Battery Burnisher - 20"

NSS® Charger 2022ABLT Battery Burnisher - 20"

Item # NSS-6402014

  • The economical choice for high gloss wet-look shine applications. A 24 volt 225 AH battery pack provides up to 2.5 hours of burnishing.
  • 60" L x 23" W x 43" H
  • (4) 6V 225 AH batteries
  • DC permanent magnet, 24V, 2.0 HP motor
20", ea
Manufacturer Item #6402014


  • With a 2500 RPM motor and 60-70 lbs of pad pressure, this machine produces a high gloss shine.
  • Designed with careful attention to the machine balance, this machine is easy to maneuver.
  • Hinged 90° head mechanism for compact storage and standing pad changes.
  • Multiple handle positions lets your operator find the optimal ergonomic position for comfortable operation.
  • The low profile pad driver, offset from the body 6" to the right, makes burnishing under shelves easy.
  • Quiet operation (only 68 dBA) provides scheduling flexibility to burnish floors in occupied facilities at any time, with minimal disruption to customers and co-workers.
  • Digital readout lets the operator know the percentage of usable battery life remaining. It also displays diagnostic codes if service is needed.
  • The machine cover flips up for quick access to batteries.
  • The durable polyethylene, steel reinforced body is built for heavy duty commercial use.
  • The Flexiwall shield surrounds the pad, preventing debris from entering the pad rotation area.
  • The on-board battery charger provides the convenience of recharging anytime, anywhere.
  • The built-in battery tray and drain permit quick clean-up in the case of battery acid spills inside the machine.


  • Pad Speed: 2500 RPM
  • Pad Pressure: 60-70 lbs.
  • Pad Size: 20"
  • Pad Driver: 20"
  • Drive: Pad assist (AB)
  • Switches & Controls: Tilt switch prevents accidental pad rotation in raised position. Master on/off switch. Handlebar lever brush control. Handle on scrub head raises machine 90° from operator to pad change position.
  • Overload Protection: Controller protects motors from overloads. 90 amp reset circuit breaker.
  • Frame: 12 gage steel channel structure
  • Housing: Polyethylene with steel reinforcement
  • Flexiwall Shield: ABS plastic with steel liner
  • Front Wheels: Two 8" x 2"
  • Caster: One 4" ball-bearing
  • Sound Level: 68 dBA
  • Weight: 435 lbs
  • Warranty: 3 years limited
  • Productivity: 16,260 sq ft per hour, 40,650 sq ft per charge
/ 5